Battery Analyzer
BM5102.8-inch 6V/12V/24V Battery Analyzer with Non-Polarity Clamps
Analyze compatible 6/12/24 V lead-acid batteries with CCA, SOH, SOC, resistance and voltage results on a 2.8-inch backlit TFT color display. Suitable for in-vehicle or out-of-vehicle battery…
Product overview
The BM510 analyzes compatible 6/12/24 V lead-acid starting batteries through terminal connections, providing CCA, SOH, SOC, resistance and voltage information. Enter the battery’s correct rated value and maintain good clamp contact for comparable results. Analysis supports maintenance decisions; it does not directly measure remaining Ah capacity or predict exact service life.
Key capabilities
Multi-metric battery analysis
Review CCA, State of Health (SOH), State of Charge (SOC), resistance and voltage together. SOC and SOH are algorithmic estimates; do not base replacement solely on one percentage.
Test against the rated value
Supports Flooded, AGM flat-plate, AGM spiral, GEL and EFB lead-acid batteries. Match voltage and rating to the battery label and device menu. 100–2000 CCA is the CCA test range; do not mix rating standards.
Clear review and records
A 2.8-inch backlit TFT color display presents results. Record the entered rating, test conditions and results for later comparison.
System checks and data review
Supports cranking, charging and load checks, live voltage waveforms, waveform playback and battery-test records. Follow each procedure; battery-analysis voltage coverage does not establish universal system-test limits.
Two test modes
Quick testing uses an Ah-based estimate; accurate testing uses the battery label’s standard and rating. Prefer the actual nameplate rating when known.
Non-polarity connection and gauge view
Supports non-polarity clamp connection as specified for this model; keep clamps from touching. The Multimeter menu provides a battery/charging gauge view, not the full current, resistance and other functions of a general-purpose multimeter.
Suggested workflow
Check the battery and conditions — Verify voltage, type and rating standard; prepare the battery and handle surface charge as instructed.
Connect and enter the rating — Secure clean battery-terminal contact using the model’s non-polarity instructions. Select voltage and standard, then enter the nameplate rating.
Interpret and recheck — Interpret voltage, SOH and SOC alongside symptoms. If undercharged, recharge and rest as instructed before retesting; retain service records.
Frequently asked questions
How do SOH, SOC and actual Ah capacity differ?
SOH estimates health and SOC estimates charge state. Neither directly measures actual Ah capacity, which requires controlled charge/discharge testing under the relevant standard.
Can it test lithium batteries or traction packs?
The listed application is lead-acid batteries within the stated voltage and type limits. Do not extend this to lithium, high-voltage traction packs or unlisted chemistries.
Why can results change on the same battery?
Clamp contact, corrosion, temperature, surface charge, vehicle loads and entered ratings affect results. Standardize conditions before comparing repeated tests.
Do UPS and other battery types yield the same SOH conclusions?
Do not assume so. Product material limits UPS, electric-vehicle and motorcycle battery checks to resistance, charge and voltage references, not reliable service-life measurement. Verify the exact battery and test mode.
Product design

Documentation and support
Key features
Applications
Technical specifications
| Item | Specification or function |
|---|---|
| Model | BM510 |
| Nominal battery voltages | 6/12/24 V |
| Battery types | Flooded, AGM flat-plate, AGM spiral, GEL and EFB lead-acid batteries |
| CCA range | 100–2000 CCA |
| Analysis metrics | CCA / SOH / SOC / resistance R / voltage V |
| Display | 2.8-inch backlit TFT color |
| Test connection | Non-polarity clamps; follow this model’s connection instructions |
| Use | In-vehicle / out-of-vehicle under manual conditions |
| Operating temperature | −20°C to 60°C |
| Voltage waveform | Real-time voltage graph |
| System checks | Cranking and charging; voltage limits and procedure per manual |
| Resolution | 320 × 240 |
| Test method | Four-wire Kelvin connection |
| Rating standards | CCA, BCI, CA, MCA, JIS, DIN, IEC, EN, SAE, GB; select per menu |
| Test modes | Quick test (Ah-based estimate) / accurate test (nameplate rating) |
| Records | Waveform playback, battery-test records and up to 10 screenshots |
| Updates | USB file update using official files for this model |
| Protection and prompts | Reverse-connection, high-input-voltage and poor-contact safeguards/prompts |
| Gauge view | Multimeter menu: battery and charging-condition gauge |
| Body dimensions | 191.9 × 90.6 × 35 mm |
| Operating input voltage | 5–32 V |
| Interface languages | 11 including Chinese, English and Japanese; per device menu |
| Waveform and result storage | Up to 10 waveform sets and the latest battery-test result |
| Themes and alerts | Multiple display themes and buzzer alerts |
SOH, SOC and CCA analysis supports maintenance; it does not guarantee actual Ah capacity or remaining service life. Use good contact, correct ratings and proper test conditions.
OBDRESOURCE
