Phone Number

+8675529071623

Battery Analyzer

BM8006V/12V/24V Battery Analyzer with Thermal Printer

2.8-inch color display, 6/12/24 V battery analysis, non-polarity clamps and built-in thermal printing. Starting, charging, load and waveform checks support service records.

Product overview

The BM800 analyzes compatible 6/12/24 V lead-acid starting batteries through terminal connections, providing CCA, SOH, SOC, resistance and voltage information. Enter the battery’s correct rated value and maintain good clamp contact for comparable results. Analysis supports maintenance decisions; it does not directly measure remaining Ah capacity or predict exact service life.

Key capabilities

Multi-metric battery analysis

Review CCA, State of Health (SOH), State of Charge (SOC), resistance and voltage together. SOC and SOH are algorithmic estimates; do not base replacement solely on one percentage.

Test against the rated value

Supports Flooded, AGM flat-plate, AGM spiral, GEL and EFB lead-acid batteries. Match voltage and rating to the battery label and device menu. 100–2000 CCA is the CCA test range; do not mix rating standards.

Clear review and records

A 2.8-inch backlit TFT color display presents results. Record the entered rating, test conditions and results for later comparison.

System checks and data review

Supports cranking, charging and load checks, live voltage waveforms, waveform playback and battery-test records. Follow each procedure; battery-analysis voltage coverage does not establish universal system-test limits.

Two test modes

Quick testing uses an Ah-based estimate; accurate testing uses the battery label’s standard and rating. Prefer the actual nameplate rating when known.

Non-polarity connection and gauge view

Supports non-polarity clamp connection as specified for this model; keep clamps from touching. The Multimeter menu provides a battery/charging gauge view, not the full current, resistance and other functions of a general-purpose multimeter.

On-site printing and report details

Use the print key to create a thermal test report and enter details such as a VIN for service records. Verify entered information, test conditions and paper orientation; interpret reports alongside the actual service diagnosis.

Suggested workflow

  1. Check the battery and conditions — Verify voltage, type and rating standard; prepare the battery and handle surface charge as instructed.

  2. Connect and enter the rating — Secure clean battery-terminal contact using the model’s non-polarity instructions. Select voltage and standard, then enter the nameplate rating.

  3. Interpret and recheck — Interpret voltage, SOH and SOC alongside symptoms. If undercharged, recharge and rest as instructed before retesting; retain service records.

Frequently asked questions

How do SOH, SOC and actual Ah capacity differ?

SOH estimates health and SOC estimates charge state. Neither directly measures actual Ah capacity, which requires controlled charge/discharge testing under the relevant standard.

Can it test lithium batteries or traction packs?

The listed application is lead-acid batteries within the stated voltage and type limits. Do not extend this to lithium, high-voltage traction packs or unlisted chemistries.

Why can results change on the same battery?

Clamp contact, corrosion, temperature, surface charge, vehicle loads and entered ratings affect results. Standardize conditions before comparing repeated tests.

What if printing is blank or paper jams?

Check paper specification, coated side, feed direction and cover closure. Verify power and the paper path as instructed before retrying; do not force the paper.

Product design

BM800 Product design

Documentation and support

View product documentation and contact technical support

Key features

2.8-inch color display, 6/12/24 V battery analysis, non-polarity clamps and built-in thermal printing. Starting, charging, load and waveform checks support service records.

Applications

BM800 6V/12V/24V battery analyzer with 100–2000 CCA testing, SOH/SOC, starting/charging checks, waveform playback and thermal reports. View specifications and FAQ.

Technical specifications

ItemSpecification or function
ModelBM800
Nominal battery voltages6/12/24 V
Battery typesFlooded, AGM flat-plate, AGM spiral, GEL and EFB lead-acid batteries
CCA range100–2000 CCA
Analysis metricsCCA / SOH / SOC / resistance R / voltage V
Display2.8-inch backlit TFT color
Test connectionNon-polarity clamps; follow this model’s connection instructions
UseIn-vehicle / out-of-vehicle under manual conditions
Operating temperature−20°C to 50°C
Voltage waveformReal-time voltage graph
System checksCranking and charging; voltage limits and procedure per manual
Resolution320 × 240
Test methodFour-wire Kelvin connection
Rating standardsCCA, BCI, CA, MCA, JIS, DIN, IEC, EN, SAE, GB; select per menu
Test modesQuick test (Ah-based estimate) / accurate test (nameplate rating)
RecordsWaveform playback, battery-test records and up to 10 screenshots
UpdatesUSB file update using official files for this model
Protection and promptsReverse-connection, high-input-voltage and poor-contact safeguards/prompts
Gauge viewMultimeter menu: battery and charging-condition gauge
Body dimensions225 × 90 × 42.9 mm
Operating input voltage4.9–32 V
Interface languages11 including Chinese, English and Japanese; per device menu
Waveform and result storageUp to 10 waveform sets and the latest battery-test result
Themes and alertsMultiple display themes and buzzer alerts
Report printingBuilt-in thermal printer with dedicated print key
Paper57 mm-wide thermal paper, illustrated roll diameter 30 mm; load per manual
Report detailsCustom information input including VIN

SOH, SOC and CCA analysis supports maintenance; it does not guarantee actual Ah capacity or remaining service life. Use good contact, correct ratings and proper test conditions.

BM800 6V/12V/24V Battery Analyzer with Thermal Printer

Watch video

If your browser cannot play this video, open the original video link. Open original video ↗