Phone Number

+8675529071623

Battery Analyzer

BM5006V/12V/24V Bluetooth Battery Analyzer for iOS & Android

Bluetooth 4.2 connects to the BM500 app for compatible 6/12/24 V lead-acid battery analysis, non-polarity clamps, starting/charging checks, voltage waveforms and shareable reports.

Product overview

The BM500 analyzes compatible 6/12/24 V lead-acid starting batteries through terminal connections, providing CCA, SOH, SOC, resistance and voltage information. Enter the battery’s correct rated value and maintain good clamp contact for comparable results. Analysis supports maintenance decisions; it does not directly measure remaining Ah capacity or predict exact service life.

Key capabilities

Multi-metric battery analysis

Review CCA, State of Health (SOH), State of Charge (SOC), resistance and voltage together. SOC and SOH are algorithmic estimates; do not base replacement solely on one percentage.

Test against the rated value

Supports Flooded, AGM flat-plate, AGM spiral, GEL and EFB lead-acid batteries. Match voltage and rating to the battery label and device menu. 100–2000 CCA is the CCA test range; do not mix rating standards.

Mobile control and report sharing

Run the BM500 app on a supported iOS or Android phone to view data and create image/text reports. Sharing and phone-side printing depend on compatible system, apps and external printer; no printer is built into the tester.

Bluetooth and non-polarity clamps

Power the unit, enable phone Bluetooth and connect through the app workflow. Range and stability depend on the phone, obstructions and interference; a connection indicator does not replace checking clamp contact.

Suggested workflow

  1. Check the battery and conditions — Verify voltage, type and rating standard; prepare the battery and handle surface charge as instructed.

  2. Connect and enter the rating — Secure the clamps according to this model’s non-polarity instructions. Select the correct settings and enter the nameplate rating; do not guess CCA.

  3. Interpret and recheck — Interpret voltage, SOH and SOC alongside symptoms. If undercharged, recharge and rest as instructed before retesting; retain service records.

Frequently asked questions

How do SOH, SOC and actual Ah capacity differ?

SOH estimates health and SOC estimates charge state. Neither directly measures actual Ah capacity, which requires controlled charge/discharge testing under the relevant standard.

Can it test lithium batteries or traction packs?

The listed application is lead-acid batteries within the stated voltage and type limits. Do not extend this to lithium, high-voltage traction packs or unlisted chemistries.

Why can results change on the same battery?

Clamp contact, corrosion, temperature, surface charge, vehicle loads and entered ratings affect results. Standardize conditions before comparing repeated tests.

What should I check if the app will not connect?

Check device power, clamp contact, phone Bluetooth and required app permissions. Use the correct BM500 app close to the tester and follow current connection instructions.

Product design

BM500 Product design

Documentation and support

View product documentation and contact technical support

Key features

Bluetooth 4.2 connects to the BM500 app for compatible 6/12/24 V lead-acid battery analysis, non-polarity clamps, starting/charging checks, voltage waveforms and shareable reports.

Applications

BM500 Bluetooth battery analyzer for 6/12/24 V lead-acid batteries, 100–2000 CCA. Use the iOS/Android app for SOH, SOC, voltage, resistance, waveforms and reports.

Technical specifications

ItemSpecification or function
ModelBM500
Nominal battery voltages6/12/24 V
Battery typesFlooded, AGM flat-plate, AGM spiral, GEL and EFB lead-acid batteries
CCA range100–2000 CCA
Analysis metricsCCA / SOH / SOC / resistance R / voltage V
Displaymobile-app
Test connectionNon-polarity clamps per model instructions
UseIn-vehicle / out-of-vehicle under manual conditions
Body dimensions73 × 45 × 20 mm
Operating input voltageDC 6–30 V
Operating temperature−40°C to 80°C
Voltage waveformReal-time voltage graph
System checksCranking and charging; voltage limits and procedure per manual
Wireless connectionBluetooth 4.2
PlatformBM500 app for supported iOS/Android devices; current app requirements apply
Rating standardsCCA, IEC, EN, DIN, CA, BCI, MCA, SAE, GB, JIS
Test modesStandard/quick battery tests, cranking and charging checks
ReportsApp-generated image/text reports and sharing; no built-in printer
Status and languagesConnection LED, app audio/visual prompts; languages per current version

SOH, SOC and CCA analysis supports maintenance; it does not guarantee actual Ah capacity or remaining service life. Use good contact, correct ratings and proper test conditions.

BM500 6V/12V/24V Bluetooth Battery Analyzer for iOS & Android

Watch video

If your browser cannot play this video, open the original video link. Open original video ↗