TPMS Tools
EL50448Super 2-in-1 TPMS Relearn Tool for GM & Ford
Two selectable GM/Ford modes activate compatible 315/433 MHz sensors for vehicle relearn. A 9 V battery-powered tool for rotation, seasonal wheel changes and supported sensor replacement.
Product overview
The OBDResource Super EL50448 combines GM and Ford sensor activation modes in one handheld tool. Select the appropriate mode and follow the vehicle’s prescribed relearn process, activating each sensor in sequence so the vehicle can register its ID and wheel position.
Key capabilities and applications
Selectable GM and Ford modes
Select the mode for the supported GM or Ford application. Some models require the specific settings stated in the instructions.
Routine tire service
Assist relearn after tire rotation, seasonal wheel changes or compatible sensor replacement. Correct leaks, low pressure or hardware faults before relearning.
Correct placement matters
Antenna positioning can differ between GM and Ford procedures. Hold the tool near the relevant valve stem and wait for vehicle confirmation before moving on.
Suggested service workflow
Confirm the application and tire condition — Verify vehicle and sensor specifications, repair leaks or hardware faults and set the specified tire pressure first.
Prepare the vehicle-specific relearn — Follow the vehicle service instructions to prepare relearn. On a tool with vehicle menus, select the correct make, model, year and market.
Activate and confirm each wheel — Use the specified wheel order and antenna position, waiting for the required vehicle or tool confirmation before proceeding.
Complete and verify — After relearn, verify wheel positions and warning status. If unsuccessful, check tool battery, vehicle mode, sensor frequency, protocol and condition.
Compatibility depends on make, model, year, market and sensor protocol. Follow the instructions for the specific tool and vehicle.
Frequently asked questions
Are the GM and Ford procedures identical?
No. Mode, relearn entry, antenna positioning and confirmation can differ. Follow the tool instructions and vehicle-specific procedure.
Can it display pressure or program sensors?
This model focuses on activation and vehicle relearn assistance. It does not display live pressure, create/clone sensor IDs or read/write OBD fault codes.
Will relearn always clear the TPMS warning?
No. First set tire pressure to the vehicle placard requirement and address leaks, failed sensors or incompatible frequency/protocols, then complete the prescribed relearn and verification.
What information is needed to confirm compatibility?
Provide the vehicle make, model, year, market, sensor OE number and required operation. Different years or markets within one brand may use different sensors and relearn methods.
Product design

Related products and support
EL50448 TPMS Sensor Activation & Relearn Tool for GM · Super EL50448 Ultra TPMS & RF/IR/IMMO Signal Tester
Key features
Applications
Technical specifications
| Item | Specification or function |
|---|---|
| Model | Super EL50448 |
| Tool type | TPMS sensor activation and relearn assistance tool |
| Vehicle applications | Supported GM and Ford models; verify the exact model and year |
| Sensor frequencies | 315 MHz / 433 MHz |
| Operating modes | GM / Ford selectable modes |
| Power supply | One 9 V battery; battery not included |
| Dimensions | 152 × 58 × 35 mm |
| Operating temperature | −20°C to 80°C |
| Controls | Single-button operation and mode selection |
| Display and feedback | G/F mode indicators |
| Vehicle connection | Wireless activation near the valve stem; no OBD cable connection |
| Sensor programming | Does not create, clone or program replacement sensor IDs |
| Relearn prerequisite | Vehicle must first enter its specified TPMS relearn mode |
Compatibility depends on make, model, year, market and sensor protocol. Follow the instructions for the specific tool and vehicle.
OBDRESOURCE
