Phone Number

+8675529071623

Battery Analyzer

BR550+6V/12V/24V Battery Analyzer with Voltage Waveform

Analyze compatible 6/12/24 V lead-acid batteries with CCA, SOH, SOC, resistance and voltage results on a 1.8-inch color display. Suitable for in-vehicle or out-of-vehicle battery checks.

Product overview

The BR550+ analyzes compatible 6/12/24 V lead-acid starting batteries through terminal connections, providing CCA, SOH, SOC, resistance and voltage information. Enter the battery’s correct rated value and maintain good clamp contact for comparable results. Analysis supports maintenance decisions; it does not directly measure remaining Ah capacity or predict exact service life.

Key capabilities

Multi-metric battery analysis

Review CCA, State of Health (SOH), State of Charge (SOC), resistance and voltage together. SOC and SOH are algorithmic estimates; do not base replacement solely on one percentage.

Test against the rated value

Supports Flooded, AGM flat-plate, AGM spiral, GEL and EFB lead-acid batteries. Match voltage and rating to the battery label and device menu. 100–2000 CCA is the CCA test range; do not mix rating standards.

Clear review and records

A 1.8-inch color display presents results. Record the entered rating, test conditions and results for later comparison.

Real-time voltage waveform

Use the waveform page to follow voltage changes as a trend reference. It does not establish oscilloscope bandwidth, sampling performance or every automatic starting/charging-system test.

Proportional CCA/Ah conversion

Enter CCA or Ah from the battery label; the device converts proportionally for analysis. A converted Ah value is not capacity measured by a controlled discharge test and cannot guarantee runtime.

Suggested workflow

  1. Check the battery and conditions — Switch off the engine and verify battery voltage, type and nameplate rating. Recharge an undercharged battery and handle surface charge as instructed.

  2. Connect and enter the rating — Connect red positive and black negative to clean terminals with secure contact. Select the correct settings and enter the nameplate rating; do not guess CCA.

  3. Interpret and recheck — Interpret voltage, SOH and SOC alongside symptoms. If undercharged, recharge and rest as instructed before retesting; retain service records.

Frequently asked questions

How do SOH, SOC and actual Ah capacity differ?

SOH estimates health and SOC estimates charge state. Neither directly measures actual Ah capacity, which requires controlled charge/discharge testing under the relevant standard.

Can it test lithium batteries or traction packs?

The listed application is lead-acid batteries within the stated voltage and type limits. Do not extend this to lithium, high-voltage traction packs or unlisted chemistries.

Why can results change on the same battery?

Clamp contact, corrosion, temperature, surface charge, vehicle loads and entered ratings affect results. Standardize conditions before comparing repeated tests.

Product design

BR550+ Product design

Documentation and support

View product documentation and contact technical support

Key features

Analyze compatible 6/12/24 V lead-acid batteries with CCA, SOH, SOC, resistance and voltage results on a 1.8-inch color display. Suitable for in-vehicle or out-of-vehicle battery checks.

Applications

BR550+ 6/12/24 V battery analyzer with a 100–2000 CCA range, SOH, SOC, resistance and voltage results. View specifications, test steps and FAQ.

Technical specifications

ItemSpecification or function
ModelBR550+
Nominal battery voltages6/12/24 V
Battery typesFlooded, AGM flat-plate, AGM spiral, GEL and EFB lead-acid batteries
CCA range100–2000 CCA
Analysis metricsCCA / SOH / SOC / resistance R / voltage V
Display1.8-inch color
Test connectionPositive/negative alligator clamps
UseIn-vehicle / out-of-vehicle under manual conditions
Voltage waveformReal-time voltage graph
Rating inputCCA or Ah with automatic proportional conversion; not actual capacity measurement
Protection and promptsReverse-polarity protection and poor clamp-contact prompt
Battery-test conditionsEngine off; recharge an undercharged battery as instructed before testing

SOH, SOC and CCA analysis supports maintenance; it does not guarantee actual Ah capacity or remaining service life. Use good contact, correct ratings and proper test conditions.

BR550+ 6V/12V/24V Battery Analyzer with Voltage Waveform

Watch video

If your browser cannot play this video, open the original video link. Open original video ↗