Phone Number

+8675529071623

Relay Tester

RT100PLUS Automotive Relay Tester (Upgraded Version, Compatible with Special Relays such as Mercedes-Benz/BMW)

Automatically identifies and adapts to 12/24 V relays, with 5 matching pin configurations. After manually selecting 4PIN/5PIN, it performs 20 open/close tests. Supports power supply via 3 AA…

Product overview

Upgraded Features:
Supports testing special relays such as Mercedes-Benz/BMW.

Automatic Voltage Identification, Manual Pin Selection
Supports matching 12/24 V, 4-pin or 5-pin NO/NC relays and 5 pin configurations. First check the relay circuit diagram, pin pitch, and socket, then set 4PIN/5PIN. Do not assume compatibility based solely on pin count.

20-Cycle Open/Close Test and Audible/Visual Feedback
After pressing TEST, the tester automatically performs 20 open/close tests to observe coil and contact consistency. When completed, a green light indicates pass and a red light indicates abnormality; the result is not complete proof of rated high-current load, long-term durability, or reliability at all temperatures.

Dual Power Supply and Low-Battery Alert
Can be powered by 3 AA batteries or 5 V/2 A Type-C. In AA mode, when the battery is low, it double-beeps every 5 seconds; when the battery is insufficient, the red light turns on and a long beep sounds for about 3 seconds, and testing pauses. Type-C mode does not provide AA remaining-battery-level judgment.

Auto Power-Off and Portable Use
Automatically powers off after about 1 minute of inactivity. The ABS body and surface coating make it easy to hold. Test only one relay at a time; after testing, allow it to cool according to the instructions before touching the pins.

Recommended Operating Procedure
Select the power supply — correctly install 3 AA batteries, or connect a Type-C power supply that meets the requirements; battery power must be sufficient.

Confirm pin positions and use a single relay — power on, check the relay circuit and socket, select 4PIN/5PIN, and insert only one relay.

Test, record, and cool down — press TEST and wait for completion, then read the audible/visual feedback. If abnormal, first check the power supply, pin positions, and contact. After powering off, remove the relay and allow it to cool according to the instructions.

Key features

Automatically identifies and adapts to 12/24 V relays, with 5 matching pin configurations. After manually selecting 4PIN/5PIN, it performs 20 open/close tests. Supports power supply via 3 AA batteries or Type-C, provides audible and visual results, and au

Applications

RT100 PLUS Upgraded Automotive Relay Tester, supports special relays such as Mercedes-Benz and BMW; automatically identifies 12/24 V, supports 4/5-pin NO/NC, and is powered by 3 AA batteries or 5V/2A Type-C. View the 20-cycle open/close test, low-battery

Technical specifications

ItemSpecification or function
ModelRT100  PLUS
Relay application12/24 V, 4/5-pin NO/NC electromechanical relays, 5 matching layouts
Voltage identificationAutomatic supported 12/24 V identification
Pin settingManual 4PIN/5PIN switch
Switching checks20 switching checks per test
Power3 × AA or Type-C 5 V/2 A
Result feedbackRed/green LEDs and buzzer; green pass/red issue after completion
Low AA powerLow: double beep every 5 s; insufficient: red + approx. 3 s beep, no testing
Auto-offApprox. 1 minute idle
DimensionsFace 152×75 mm; body approx. 27 mm thick, approx. 38 mm including sockets
MaterialABS body with tactile surface coating
Operating temperature−10–40°C
Storage temperature−20–50°C

Test one relay at a time with sufficient power and matching layout. Type-C provides power; results do not replace rated-load or endurance testing.


RT100-PLUS Automotive Relay Tester (Upgraded Version, Compatible with Special Relays such as Mercedes-Benz/BMW)