Brake Fluid Tester
BF200Backlit LCD Brake Fluid Moisture Tester for DOT3/4/5.1
DOT3, DOT4 and DOT5.1 moisture screening on a backlit LCD. Flexible illuminated probe, separate fluid/backlight/light controls, audible alerts and auto sleep aid reservoir checks.
Product overview
The BF200 screens moisture condition in compatible DOT3, DOT4 and DOT5.1 brake fluids and shows result levels on a backlit LCD. A flexible probe, LED lighting and separate fluid/light controls aid reservoir access. Results support maintenance; they do not directly measure boiling point or replace vehicle service intervals and braking-system checks.
Key capabilities
Backlit LCD and indication levels
The screen shows fluid selection and moisture-reference levels marked 0.5%, 1%, 2%, 3% and 4%. Lower levels provide a condition reference; at around 3% or above, verify and act promptly according to vehicle service requirements.
Flexible probe and separate lighting
The flexible probe reaches different positions, with separately controlled probe LEDs and LCD backlighting. Immerse only the sensing area as instructed and keep the main unit and controls dry.
Separate controls and power saving
Hold the power key for on/off, use MENU for fluid selection, S for LCD backlighting and the light key for probe illumination. Audible alerts and auto sleep complement 2 replaceable AAA batteries.
Suggested workflow
Prepare and select — Confirm the specified fluid, install 2 AAA batteries, power on and use MENU to select the reservoir fluid.
Clean and test — Clean the probe as instructed, illuminate the area and place the sensing portion in the fluid. Read when stable and avoid introducing contamination or other fluids.
Record, verify and store — Record fluid type and level; verify or replace according to service requirements if abnormal. Wipe the probe, power off and store dry.
Frequently asked questions
Are DOT5 and DOT5.1 the same fluid?
No. Silicone-based DOT5 differs from non-silicone DOT5.1. Listed selections are DOT3, DOT4 and DOT5.1; do not extend compatibility to DOT5 or mineral fluids.
Is the percentage a precise continuous measurement?
It indicates reference levels; do not treat the scale as laboratory-precision continuous moisture analysis. Fluid setting, temperature and probe contamination affect results; verify with an appropriate professional method when needed.
Does it measure boiling point or diagnose every braking fault?
No. It screens fluid moisture condition, not boiling point, hydraulic pressure, wear or leaks. Those require the appropriate service checks.
Product design

Documentation and support
Key features
Applications
Technical specifications
| Item | Specification or function |
|---|---|
| Model | BF200 |
| Purpose | Stepped brake-fluid moisture-condition screening |
| Fluid selections | DOT3 / DOT4 / DOT5.1 |
| Display | Backlit monochrome LCD |
| Indication levels | Reference marks: 0.5%, 1%, 2%, 3%, 4%; around 3%+ replacement-alert range |
| Audible alert | High-moisture indication alert |
| Probe and sensor | Flexible metal hose and sensing probe |
| Lighting | Independent LCD backlight and probe LED control |
| Power | 2 × AAA batteries |
| Power saving | Auto sleep |
| Operating temperature | −10–50°C |
| Dimensions | 156 × 55 × 24 mm |
| Weight | Approx. 150 g including batteries |
| Housing | ABS |
| Controls | Power / MENU fluid / S backlight / probe light |
Indicated percentages support screening; they are not boiling-point measurements or brake-safety certification. Use the correct fluid setting and follow vehicle service intervals and tool instructions.
OBDRESOURCE
